Enterasys K-Series K6 Chassis

Mô tả

K-SERIES MODELSK6K10Performance/CapacitySwitching Fabric Bandwidth280 Gbps440 GbpsSwitching Throughput190 Mpps (Measured in 64-byte packets)299 Mpps (Measured in 64-byte packets)Routing Throughput190 Mpps (Measured in 64-byte packets)299 Mpps (Measured in 64-byte packets)Address Table Size32,000 MAC Addresses32,000 MAC AddressesVLANs Supported4,0964,096Transmit Queues1111Classification Rules8,196/chassis8,196/chassisPacket Buffering3.0GB4.5GBPhysical SpecificationsChassis Dimensions (H x W x D)H: 22.15 cm (8.719″)
W: 44.70 cm (17.60″)
D: 35.546 cm (14″)
5UH: 31.02 cm cm (12.219″)
W: 44.70 cm (17.60″”)
D: 35.546 cm (14″)
7UHost Memory and Flash1Gb DRAM
32 MB flash memory1Gb DRAM
32 MB flash memoryEnvironmental SpecificationsOperating Temperature+5 °C to +40 °C (41 °F to 104 °F)Storage Temperature-30 °C to +73 °C (-22 °F to 164 °F)Operating Humidity5% to 95% relative humidity, non-condensingPower Requirements100 to 125 VAC, 12 A or 200 to 250 VAC, 7.6 A; 50 to 60 Hz (Max per power supply)Power over Ethernet SpecificationsSystem Power

  • Automated or manual PoE power distribution
  • Per-port enable/disable, power level, priority safety, overload, and short-circuit protection
  • System power monitor
  • PoE Power:
    400W per power supply (100 to 125 VAC) 2400W Max.
    800W per power supply at (200 to 250 VAC) 4800W Max.

Standards Compliance

  • IEEE 802.3af
  • IEEE 802.3at

Agency and Standards SpecificationsSafetyUL 60950-1, FDA 21 CFR 1040.10 and 1040.11, CAN/CSA C22.2 No.60950-1, EN 60950-1, EN 60825-1, EN 60825-2, IEC 60950-1, 2006/95/EC (Low Voltage Directive)Electromagnetic compatibilityFCC 47 CFR Part 15 (Class A), ICES-003 (Class A), EN 55022 (Class A), EN 55024, EN 61000-3-2, EN 61000-3-3, AS/NZ CISPR-22 (Class A). VCCI V-3. CNS 13438 (BSMI), 2004/108/EC (EMC Directive)Environmental2002/95/EC (RoHS Directive), 2002/96/EC (WEEE Directive), Ministry of Information Order #39 (China RoHS)